Power and Energy
An emission rate-based carbon tax is applied to fossil-fueled generators along with a Smart Grid resource allocation (SGRA) approach. The former reduces the capacity factors (CFs) of base load serving fossil-fueled units, while the latter reduces the CFs of peak load serving units. The objective is to quantify the integration of the carbon tax and the SGRA approach on CO2 emissions and electricity prices in a multi-area power grid.
- Categories:
282 Views
Data for 24-node, 54-node, 86-node, and 138-node test networks for reliability-oriented distribution expansion planning applications; and the results for 24-node and 54-node systems.
- Categories:
667 Views
This data is related to the paper: "Energy hardware and workload aware job scheduling towards interconnected HPC environments". In includes two energy models for nodes equipped with Intel Gold and Platinum CPUs, and eight application's data, to be used to estimate runtime, energy, and power at different frequencies. For detailed information on the energy model and how to use it, please read the paper.
First model: 2x Platinum 8168 CPU [2.70GHz-1.20GHz]24C, TDP 205W, 12 x 16GB DDR4 SDRAM
Second model: 2x Gold 6254 CPU [3.10GHz-1.20GHz] 18C,TDP 200W, 12 x 32GB DDR4 SDRAM
- Categories:
223 Views
The large variability of system and types of heating load is a feature of the commercial metering of thermal energy. Heating consumption depends on many factors, for example, wall and roof material, floors number, system (opened and closed) etc. The daily data from heating meters in the residential buildings are presented in this dataset for comparing the thermal characteristics. These data are supplemented by floors number, wall material and year of construction, as well as data on average daily outdoor temperatures.
- Categories:
1134 Views
*This datasheet is being updated progressively to provide more details.
This datasheet provides the phasor measurement data in actual power systems.
These PMU data were recorded during a Low Frequency Oscillation incident and a Short Circuit Incident, respectively.
These PMU data are used for the studies in wide-area control systems (WACS) and PMU data compressions.
Please cite this datasheet and the papers in your work if they help.
- Categories:
1530 Views
The matlab code allows you to model the i-v and p-v charateristic of photovoltaic modules as a 3D look-up table that can be used in Matalb, Simulink or other software like PLECS. The model generated is according to the single-diode, 5 parameters equivalent circuit. The ideal application of this research would be to model the PV input source in power electronics applications, where a converter is interfaced to a PV module.
- Categories:
671 Views
The paper is aimed at an investigation of the features
of a tubular-linear synchronous quasi-Halbach machine (T-LSM)
where the radially-magnetized PMs are substituted by four equal
segments with parallel magnetization. This substitution is done
in an attempt to improve the machine cost-effectiveness which
makes it a viable candidate to equip free-piston engine-based
series hybrid propulsion systems. The study is initiated by an
analytical formulation of the air gap flux density considering (i)
- Categories:
81 Views
This dataset contains the catalogs of equipment used to build the following synthetic distribution systems using RNM-US.
a) Greensboro (GSO) Synthetic System V0.2
b) San Francisco Bay Area (SFO) Synthetic System V0.8
The synthetic distribution system has been built using the U.S. Reference Network Model (RNM-US), and it includes the low voltage system, distribution transformers, medium voltage system, primary substations, sub-transmission system and transmission substations.
- Categories:
389 Views
This file contains Python code to extract the single-diode model parameters from the Photovoltaic IV-curve.
- Categories:
548 Views
- Categories:
392 Views