wireless communications
The experimental measurement setup is performed in an anechoic chamber to secure the LOS transmission at the Millimeter Wave and Terahertz Technologies Research Laboratories (MILTAL), Scientific and Technological Research Council of Turkey (TUBİTAK), Kocaeli. The dimensions of anechoic chamber are 7m × 4m × 3m. The dataset includes channel impulse response in between 240GHz and 300GHz for the transmitter-receiver distance of 20 cm, 30 cm, 40 cm, 50 cm, 60 cm, 70 cm, 80 cm, 90 cm and 100 cm and different misalignment degrees.
- Categories:
316 Views
This article presents the details of the Cardinal RF (CardRF) dataset. CardRF is acquired to foster research in RF- based UAV detection and identification or RF fingerprinting. RF signals were collected from UAV controllers, UAV, Bluetooth, and Wi-Fi devices. Signals are collected at both visual line-of-sight and beyond-line-of-sight. The assumptions and procedure for the data acquisition are presented. A detailed explanation of how the data can be utilized is discussed. CardRF is over 65 GB in storage memory.
- Categories:
7998 Views
This dataset contains RF signals from drone remote controllers (RCs) of different makes and models. The RF signals transmitted by the drone RCs to communicate with the drones are intercepted and recorded by a passive RF surveillance system, which consists of a high-frequency oscilloscope, directional grid antenna, and low-noise power amplifier. The drones were idle during the data capture process. All the drone RCs transmit signals in the 2.4 GHz band. There are 17 drone RCs from eight different manufacturers and ~1000 RF signals per drone RC, each spanning a duration of 0.25 ms.
- Categories:
16284 Views