Data: Fifteen 255W Panels Connected Li-Ion

Input 

Solar Panel rating  255W,Tier 1 solar panel

Number of Solar Panels :  15

Batery 72 AH 37V ,Li- ion, Battery Parameters same as  https://dx.doi.org/10.21227/tmwn-rp96 

RESULT

Input  Power : 3 - 4 kW

Output power : 3- 5 kW 

Dataset Files

 Total Datasets =  14.

1. batcharge.mat
2. batcurrent.mat
3. batdischarge.mat
4. batiso.mat
5. batvoltage.mat
6. bms_synchronousMOSFET.mat
7. indbms_mos.mat
8. irradiance.mat
9. MPPT_inductor.mat
10. mppt.mat 
11. outputvoltage.mat
12. solarcurrent.mat
13. solarpower.mat
14. solarvoltage.mat

1)batcharge.mat is the battery charging current.

2) batcurrent.mat is the battery current.

3) batdischarge.mat is the battery discharging current.

4) batiso.mat is the dataset when the battery is fully charged and isolated.

5) batvoltage.mat is the data of battery voltage with load connected and battery discharges.

6) bms_synchronousMOSFET.mat  is the data from the BMS controller. The data is of MOSFET which is used instead of diode as synchronous MOSFET.

7) indbms_mos.mat is the DC-DC boost MOSFET

8) irradiance.mat is the irradiance.

9) MPPT_inductor.mat is the boost DC-DC inductor.

10) mppt.mat is the dataset when the MPPT modes gets on or off.

11) outputvoltage.mat is the output voltage with the load connected.

12) solarcurrent.mat is the solar panel current.

13) solarpower.mat is the solar panel collected power.

14) solarvoltage.mat is the solar panel voltage.

How use Dataset Files

 The data can be studied and used in various ways. 

(1)  The values given in the dataset or in the Research paper can be used by manufacturers, R&D engineers,battery manufacturers etc.

(2)  The dataset and Research paper can be used to design more variants.

(3) The dataset and Research paper can be used for study using less engineering knowledge or with open-source softwares.

(4)  There are many data analysis softwares - proprietary and open source softwares.

(5)  The dataset can be loaded into proprietary softwares or trial versions of Finite element or other simulation softwares to regenerate same model  or other model or to conduct other study.

(6) Author has used this data to make novelty in his patent.

Funding: There are no funders for this submission. The author has himself fully self-financed (for his passion). I expect all these papers, would be nice Shroud for the passion and the price paid.

Acknowlegement :  The author as such thankful to none and does not have any special name to be acknowledged.