**.mat
Modern, industrial use cases for wireless communications are related to mobile applications such as moving robotics in industrial environments. For the design of communication systems, the behavior of the radio channel, especially over time, is of great importance. Most of the existing data sets for industrial radio channels originate from static measurement procedures, containing an arbitrary subset of the environment.
- Categories:
664 Views
This LTE_RFFI project sets up an LTE device radio frequency fingerprint identification system using deep learning techniques. The LTE uplink signals are collected from ten different LTE devices using a USRP N210 in different locations. The sampling rate of the USRP is 25 MHz. The received signal is resampled to 30.72 MHz in Matlab and is saved in the MAT file form. The corresponding processed signals are included in the dataset. More details about the datasets can be found in the README document.
- Categories:
500 Views
Dataset description:
This contains ten categories of gas data, each category contains 5 concentrations, 10, 20, 30, 40, 50ppm.
There are 160 groups of 10, 20, 30, 40, each group contains 6000 sampled voltage signals, and the sampling frequency is 10HZ.
There are only 80 groups for 50ppm concentration, and each group also contains 6000 sampled voltage signals.
The label corresponding to each gas includes category and concentration, which can be split by gas category and concentration.
- Categories:
1459 Views
Los datos empleados en el análisis del estudio fueron obtenidos del sistema SAP del Departamento Comercial de la Compañía Nacional de Electricidad (CNEL EP) Unidad de Negocio Esmeraldas. Estos datos consisten en registros originales de consumo mensual de energía eléctrica facturada (expresada en kilovatios-hora, kWh) durante un periodo de 25 meses (enero de 2021 a enero 2023). Estos registros pertenecen a 136218 clientes aproximadamente de del sector residencial de la provincia de Esmeraldas.
- Categories:
714 Views
This data set is the data of the studies carried out in the article named "BalanSENS: Robotic platform system for balance analysis, rehabilitation and assistance with feedforward and feedback signals". BalanSENS is devised to embrace an approach that promotes active engagement by amalgamating diverse sensory inputs to enhance both sensory and motor functions. Its capacity to personalize balance rehabilitation for each individual is accomplished through a three-phase framework. The attributes of the servo motors are assessed to demonstrate their suitability for I-BaR.
- Categories:
54 Views
In data file (.rar) contains 16 files in .mat format, where origin data after UMAP for training.mat is the original training data and the others are the experimental result data. data1_*.mat is the model test result file containing the simulation results (test_simu_*), model output (output_test_*), and error (error_*).
- Categories:
46 Views
Dynamic Spectrum Sharing (DSS) is an enabler for a seamless transition from 4G Long TermEvolution (LTE) to 5G New Radio (NR) by utilizing existing LTE bands without static spectrum re-farming. In this paper, we propose a cross-band DSS scheme that utilizes the Multimedia BroadcastMulticast Service over a Single Frequency Network (MBSFN) feature of an LTE network and theMulticast Broadcast Service (MBS) feature of an NR network.
- Categories:
615 Views
Dynamic Spectrum Sharing (DSS) is an enabler for a seamless transition from 4G Long TermEvolution (LTE) to 5G New Radio (NR) by utilizing existing LTE bands without static spectrum re-farming. In this paper, we propose a cross-band DSS scheme that utilizes the Multimedia BroadcastMulticast Service over a Single Frequency Network (MBSFN) feature of an LTE network and theMulticast Broadcast Service (MBS) feature of an NR network.
- Categories:
422 Views
These data is state estimation accuracy of the proposed algorithm When the adjust factor is 1
These data includes the position estimation accuracy and velocity estimation accuracy of the algorithm.
The data are explained as follows:
rmse_ckf_1,rmse_ukf_1,rmse_vakf_1,rmse_vakfpr_1,rmse_okf_1 are the position accuracy of the CKF, UKF, the proposed IW_VACKF, VACKF_PR and CKF-TNCM, respectively.
rmse_ckf_2,rmse_ukf_2,rmse_vakf_2,rmse_vakfpr_2,rmse_okf_2 are the velocity accuracy of the CKF, UKF, the proposed IW_VACKF, VACKF_PR and CKF-TNCM, respectively.
- Categories:
84 Views
With the growth of Internet of Things (IoT) applications, the need for accurate indoor positioning systems (IPS) has become urgent. While GPS has limitations in indoor scenarios, Visible Light Positioning (VLP) presents promising results. This paper addresses the challenge of estimating the receiver's height in three-dimensional (3D) positioning scenarios, a crucial problem in VLP. We propose a novel 3D VLP algorithm, adopting a multiple estimation strategy for height estimation to minimize random errors.
- Categories:
124 Views