EMC
IEC 62228-5 requires electrostatic discharge (ESD) damage test of common-mode chokes (CMCs) used in EMC evaluation of automotive Ethernet transceiver ICs. However, with the recommend ESD damage test board in IEC 62228-5, mounting and re-mounting of a jumper or 0 Ω resistor in the S-parameter measurement route (microstrip lines) are needed, which may cause uncertainty in the S-parameter measurement results. In this paper, we proposed and validated an improved ESD damage test board which ensures both S-parameter measurement and ESD application.
- Categories:
Complete input impedance measurement of the Nexans 12G6 power cable, a shielded cable with 12 conductors of cross-section $\mathbf{6 \, mm^2}$. The impedance measurement is performed with the Keysight E4990A impedance analyzer and a custom-made measurment adapter described in the associted paper.
- Categories:
This dataset is in support of my research paper 'Comparison of ElectroMagnetic Emissions & Harmonic Analysis of 20 HP Motor Controlled by 3L NPC Inverter'.
Preprint : https://doi.org/10.36227/techrxiv.19687041.v1
This is useful for manufacturers and r&d engineers for product costing. For more information, results, conclusions on this, pls read research paper.
- Categories: