Received signal strength indicator (RSSI)
A modern Wi-Fi-enabled device (e.g., a smartphone) can spontaneously emit unencrypted and anonymized signals to the environment in search of an access point. This signal is called a probe request. Since it is freely available in the open air, one can build a sensor from a Wi-Fi adapter to capture the signal. Once captured, its signal strength can be measured in the form of a Received Signal Strength Indicator (RSSI).
- Categories:
109 Views
This is the dataset of received signal strength indicator (RSSI) from Wi-Fi routers in different environments.
RSSI was collected by a person holding an Android tablet within one hour
in S301, Graduate School of Informatic Science (Main Building), Kobe University, Japan.
We collected the RSSI between the terminal and Wi-Fi routers
per second 30 times at 20 reference points with doors open.
Then, we collected RSSI data again with doors closed.
The distance between reference points is greater than or equal to 2 m.
- Categories:
118 Views
Wi-Fi FTM RSSI Localization dataset
Wi-Fi Fine Time Measurement for positioning / Indoor Localization in 3 different locations and using 8 different APs
Custom APs using ESP32C3 and Raw FTM is measured in nanoseconds
Data is only measured at the Router Side
Data is not measured at client side
Has 4 datasets inside the zip folder with over 100,000 data points
Contains processed Wi-Fi FTM packets from various routers in:
- Categories:
1153 Views
Wi-Fi BLE RSSI SQI Localization dataset
Wi-Fi BLE RSSI for positioning / Indoor Localization in 4 different locations and using 18 different APs
Data is only measured at the Router Side
Data is not measured at client side
Has 12 datasets inside the zip folder with over 1,000,000 data points
- Categories:
818 Views
# RSS data from smartwatch for Contact Tracing
This dataset was collected for the purpose to understand the proximity between any two smartwatches worn by human.
We used the Google's Wear OS based smartwatch, powered by a Qualcomm Snapdragon Wear 3100 processor, from Fossil sport to collect the data.
The smartwatch is powered by a Qualcomm Snapdragon Wear 3100 processor and has an internal memory of up to 1GB.
Two volunteers were required to wear the smartwatch on different hand and stand at a certain distance from each other.
- Categories:
713 Views
RSSI measurements collected by four anchors while receiving messages from a single mobile node transmitting advertisement and extended advertisement messages in all BLE channels (both primary and secondary advertisement channels). Tests conducted in 10x10 m office area (no large obstacles), with 4 anchors located in the corners of the area.
Cite https://ieeexplore.ieee.org/document/9661373 when using this dataset in your work.
- Categories:
822 Views
This RSSI Dataset is a comprehensive set of Received Signal Strength Indicator (RSSI) readings gathered from three different types of scenarios. Three wireless technologies were used which consisted of:
- Zigbee (IEEE 802.15.4),
- Bluetooth Low Energy (BLE), and
- WiFi (IEEE 802.11n 2.4GHz band).
- Categories:
5634 Views
A reliable and comprehensive public WiFi fingerprinting database for researchers to implement and compare the indoor localization’s methods.The database contains RSSI information from 6 APs conducted in different days with the support of autonomous robot.
- Categories:
8730 Views