Power and Energy
This dataset contains sensor and PMU data for the LEON3 CPU on the Gaisler GR712RC development platform running a subset of the BEEBS benchmark suite as well as four implementations of an industry-representative image vision algorithm. It is meant to be used by the Robust Energy and Power Predictor Selection(REPPS) methodology [https://github.com/TSL-UOB/TP-REPPS] in order to generate accurate fine-grain models.
- Categories:
288 Views
Several experimental measurement campaigns have been carried out to characterize Power Line Communication (PLC) noise and channel transfer functions (CTFs). This dataset contains a subset of the PLC CTFs, impedances, and noise traces measured in an in-building scenario.
The MIMO 2x2 CTFs matrices are acquired in the frequency domain, with a resolution of 74.769kHz, in the frequency range 1 - 100MHz. Noise traces, in the time domain with a duration of about 16 ms, have been acquired concurrently from the two multi-conductor ports.
- Categories:
656 Views
Spreadsheet use for conversion of visible light lux measurements to irradiance.
Back up for manuscript: Calculation of Visible Light Irradiance from Lux Illuminance and Relative Spectral Illuminance
- Categories:
316 Views
These videos analyze the phase currents of a six-phase electric drive when different control approaches are implemented. In fact three different model predictive control strategies are studied, in addition a conventional field oriented control using a carrier-based PWM technique is also tested. These videos have been obtained during the experimental validation of the manuscript "Current Harmonic Mitigation using a Multi-vector Solution for MPC in Six-phase Electric Drives".
- Categories:
230 Views
In this work, a multi-agent system for EV charging negotiation and management is designed. It adapts the trade with the EV owner depending on multiple parameters like seller's benefit, supplied energy and buyer's flexibility. The system can be used as a simulation process and also can be applied to a real situation. The results shows better management of the EV charging with a good satisfaction for both seller and buyers
- Categories:
299 Views
The data contains the video presentation of the platform and a supplementary document for the modified IEEE 9 bus system used in simulation.
- Categories:
178 Views
When a power transformer is reconnected to the grid, if there is a large residual flux in the iron core, significant inrush current may occur and result in reclosing failure. Thus, accurate measurement of residual flux is necessary to avoid the generating of inrush current. This paper proposes a residual flux density measurement method for single-phase transformer core based on energy changes.
- Categories:
315 Views
This dataset was used to quantify the effects of environmental change on SSTDR measurements from solar panels. We collect illuminance (Lux), temperature (deg F), and humidity (%) alongside SSTDR waveforms on a fault free string. Data is collected once per minute in January 2020, and twice per minute in August-September 2020.
- Categories:
133 Views
This Dataset, as a Matlab script, shows input voltages vectors and output voltage reference vector for improved control of input power factor in Multiphase Conventional Matrix Converters (MCMC) using the transfer function of the load angle. Compared to the direct space--vector modulation techniques, the proposed solution can rely on the load parameters and obtain the greater value of an input displacement angle in a certain range of voltage transfer ratio and the load power factor.
- Categories:
134 Views
The heating and electricity consumption data are the results of an energy audit program aggregated for multiple load profiles of a residential customer. These profiles include HVAC systems loads, convenience power, elevator, etc. The datasets are gathered between December 2010 and November 2018 with a one-hour timestep resolution, thereby containing 140,160 measurements, half of which is for heat or electricity. In addition to the historical energy consumption values, a concatenation of weather variables is also available.
- Categories:
7538 Views