Data: 24kW Three Level Vienna Rectifier PFC

********************************************************************************************

                                                                         Caution

Though the uploaded data is true,designed for the real practical scenarios only, technical familiarity is a must as it involves risks associated with handling high voltages, electrical shock, fire hazard , personal injury and/or property damage etc. The author is not responsible if the algorithm is misunderstood or all this is copied without understanding or improperly implemented and mishappening due to it. The values though analyzed but still do not guarantee anything.The author is not responsible if the copied values cause mishappening.

********************************************************************************************

Read Me

(1)  Zip or any folder neither contain any complete project folder nor any source code of project.

 (2) Extra Libraries created, modified , other scripts , not shared, as very elementary for any graduate,degree holder.

(3) All work is simple , on basic and elementary concepts, can be easily copied, remade and understood.

(4)  For other details like block/circuit diagram, set up, analysis, interpretation, parameters,  simulations, mathematical formulae used to obtain these results etc. please refer "Research Paper".

(5)  This work has undergone revisions, loss of data many times,  and many computer crashes. This will be the last version and there won't be any other improvement or corrections or re-upload.

(6)  The dataset has been checked by the 'Data or Code or model Inspector' before uploading.

(7)  If any problem in creating or copying, pls contact your university professor or board or any of the companies engineer.

(8) No other question or email will be replied.

(9) Make sure you have read Caution .

Dataset Files

Total Datasets = 22. 

1. ActivePower.mat 
2. dPI.mat
3. g1.mat  
4. g2.mat  
5. g3.mat  
6. iabcF.mat  
7. idF.mat  
8. ig_abc.mat  
9. iqF.mat 
10. omega.mat  
11. PI_vdc.mat  
12. qPI.mat  
13. ReactivePower.mat 
14. theta.mat 
15. vc1F.mat  
16. vc2F.mat 
17. vdc1.mat  
18. vdc2.mat  
19. vdcf.mat  
20. vg_abc.mat 
21. Vg.mat 
22. vneutral.mat

1) ActivePower.mat is the active power.

2) dPI.mat is the output of the PI output of the d-axis current controller.

3) g1.mat is the gate drive of leg 1 of Vienna rectifier.

4) g2.mat is the gate drive of leg 2 of Vienna rectifier.

5) g3.mat is the gate drive of leg 3 of Vienna rectifier.

6) iabcF.mat is the combined d and q -filtered current with angle theta, which is again converted to abc axis from dq axis.

7) idF.mat is the d-axis filtered current, which got converted from abc to dq axis.

8) ig_abc.mat is the three phase current ia,ib, ic measurements 

9) iqF.mat is the q-axis filtered current, which got converted from abc to dq axis.

10) omega.mat  is the frequency generated from three phase PLL.

11) PI_vdc.mat is the output of PI controller with inputs of the reference and filter DC combined voltage across capacitors, vdcf.

12) qPI.mat is the output of the PI output of the q-axis current controller.

13) ReactivePower.mat is the reactive power

14) theta.mat is the angle generated from three phase PLL.

15) vc1F.mat is the DC voltage across upper capacitor, at the output of the Vienna rectifier, which is filtered.

16) vc2F.mat is the DC voltage across lower capacitor, at the output of the Vienna rectifier, which is filtered.

17) vdc1.mat is the voltage across upper capacitor, which is connected at the output of the Vienna rectifier.

18) vdc2.mat is the voltage across lower capacitor, which is connected at the output of the Vienna rectifier.

19) vdcf.mat is the DC voltage across combined upper and lower capacitor, at the output of the Vienna rectifier, which is filtered.

20) vg_abc.mat is the three phase voltage va,vb,vc measurements .

21) Vg.mat is the output of the d-axis voltage filter.

22) vneutral.mat is the output of PI controller of the neutral point controller.

How use Dataset Files

 The data can be studied and used in various ways.

(1)  The values given in the dataset or in the Research paper can be used by manufacturers, R&D engineers,railways, machine manufacturers etc.

(2)  The dataset and Research paper can be used to design more variants.

(3) The dataset and Research paper can be used for study using less engineering knowledge or with open-source softwares.

(4)  There are many data analysis softwares - proprietary and open source softwares.

(5)  The dataset can be loaded into proprietary softwares or trial versions of Finite element or other simulation softwares to regenerate same model  or other model or to conduct other study.

(6) The collective graph of the complete dataset in each experiment is also given. For finer analysis, the dataset can be used to see details at much shorter interval.

(7)  One particular study or some experiments can be copied for degree thesis, project or phd thesis. 

Paper Citing : If want to cite this in paper etc. ,please refer DoI and/or this url.

Funding: There are no funders for this submission. The  author has himself fully self-financed (for his passion). I expect all these papers, would be nice Shroud for the passion and the price paid.

Acknowlegement :  The author as such thankful to none and does not have any special name to be acknowledged.