Signal Processing
The terahertz communications band in the 252 to325 GHz range has been recently explored for its potential to meet the stringent requirements for the emerging sixth generation of wireless communications. However, there are several challenges including noise and nonlinearity that hinder efficient implementations. We aim to address this limitation in terahertz communications through convolutional neural networks (CNN) enhanced by the domain knowledge from traditional Volterra filters.
- Categories:
261 Views
The synthetic data is generated loosely following the concepts developed by Skomedal and Deceglie (2020)
- Categories:
227 Views
Electromyography is useful for those interested in the study of biological signals and their processing, identifying the characteristics of these signals is valuable for the design of prosthetic and robotic systems or in rehabilitation for patients with pathologies of the lower limb. In this case, in particular, the EMG signals of the biceps femoris generated during the gait cycle are intended to characterize the muscle activation signals during walking. For the development of this database, one hundred users were invited to participate.
- Categories:
252 Views
A non-destructive testing system requires multiple system configuration parameters during the operation process. For a given transducer, scanning frequency and number of measurements for averaging are just among those parameters. This work tests the central limit theorem to optimally set these parameters. The authors have designed a compact ultrasound computer tomography scanner from scratch just to test this criterion. It is shown that optimal frequency value changes with respect to the scanning angle for an object with a heterogeneous inner profile.
- Categories:
50 Views
We discuss the use of multi-rate FIR filters in radio frequency (RF) transient spectroscopy as well as the implementation challenges these multi-rate filters face when used in this application to reduce the sampling rate (decimation) and raise the sampling rate (interpolation). On a Texas Instruments TMS320-C30 DSP processor, all implementation measurements given here were carried out.
- Categories:
225 Views
This dataset is made of the Channel Impulse Response (CIR) data collected in 9 different environments in Ghent city, Belgium. These environments include:
1. Fourth floor at iGent Tower in the premises of Gent University
2. Zwijnaarde Open Area
3. Stadhuis Street and Nearby
4. Zuid Mall
5. Portus Ganda
6. Sint-Pieters Railway Station
7. Krook library
8. Citadel Park
9. Graffiti Straat
- Categories:
534 Views
In this dataset, we provided the raw analog-to-digital-converter (ADC) data of a 77GHz mmwave radar for the automotive object detection scenario. The overall dataset contains approximately 19800 frames of radar data as well as synchronized camera images and labels. For each radar frame, its raw data has 4 dimension: samples (fast time), chirps (slow time), transmitters, receivers. The experiment radar was assembled from the TI AWR 1843 board, with 2 horizontal transmit antennas and 4 receive antennas.
- Categories:
5285 Views
In this dataset, we provided the raw analog-to-digital-converter (ADC) data of a 77GHz mmwave radar for the carry object detection scenario. The overall dataset contains approximately 3000 frames of radar data as well as synchronized camera images and labels. For each radar frame, its raw data has 4 dimensions: samples (fast time), chirps (slow time), transmitters, and receivers. The experiment radar was assembled from the TI cascaded-chip TIDEP-01012 board, with 12 transmit antennas and 16 receive antennas.
- Categories:
1218 Views
This dataset is a collection of phase samples retrieved from an in-house design for a Bluetooth Low Energy (BLE) 5.1 based receiver, using an 8-element Uniform Circular Array (UCA). The purpose of the dataset was the implementation of localization techniques based on the use of Angle-of-Arrival data, possible due to the BLE 5.1 Direction Finding (DF) features. Specifically, the phase differences of a Constant Tone Extension (CTE) read from the different antenna elements can be used to retrieve the AoA of a received packet.
- Categories:
271 Views
This dataset containg EMG data recorded with a sample rate of 1kHz. Data was collected from the brachioradialis, flexor carpi ulnaris and common extensor digitorum muscles.
- Categories:
491 Views