*.xlsx;

No image of dataset.

Categories:
4 Views

When a power transformer is reconnected to the grid, if there is a large residual flux in the iron core, significant inrush current may occur and result in reclosing failure. Thus, accurate measurement of residual flux is necessary to avoid the generating of inrush current. This paper proposes a residual flux density measurement method for single-phase transformer core based on energy changes.

Categories:
287 Views

There are hundreds of systems that create aircrafts. During design phases the validation and verification of these systems are done by using the data acquired by the flight test instrumentation system (FTI). Even though, there is no problem with the aircraft systems, if the measurement system is not capable of measuring it well, it results waste of efforts on unnecessary troubleshooting studies. Therefore, when designing an instrumentation system for flight testing purposes, sufficiency of the measurement system has to be proved before installation on the aircraft.

Categories:
113 Views

This data set provides a list of the indexed journal by Scopus, Web of Science, and Directory of Open Access Journals (DOAJ) with the data in each row: Journal ID, Journal name, Publisher name, Publisher Address, Print-ISSN, E-ISSN, Scope, Coverage year, Status level (such as a Top-Level, etc), Cited Score, Languages, and many more.

Reference attached on the link.

 

Categories:
305414 Views

This dataset contains the data associated with three test distribution netwroks with 24, 54, and 118 nodes.

Categories:
608 Views

The relative binding affiniy values of all 8000 tripeptide sequenses are shown here. The values are standardized by isoforms so that the mean is zero and the variance is one. The sequences are ordered by the results of hierarchical cluster analysis. 

Categories:
184 Views

Test networks for reliability-based distribution studies.

This dataset includes 5 test netwroks with 37, 85, 137, 145, and 230 nodes.

Categories:
337 Views

Vibration measurement on SAG mill drive motor for Energy harvesting or predictive maintenance

Categories:
1044 Views

The standard for measurement of solar irradiance utilizes the units of watts per meter squared (W/m2).  Irradiance meters are both costly and limited in the ability to measure low irradiance values.  With a lower cost and higher sensitivity in low light conditions, light meters measure luminous flux per unit area (illuminance) utilizing the units of lumens per meter squared or lux (lx).

Categories:
374 Views