Power and Energy
In our study, datasets of two simulators, namely phasor-based simulator and hybrid-type simulator are used. In the hybrid environment, first, the outputs of the phasor-based simulator are converted to instantaneous waveforms, then based on instruction, distortions and noises are added (superimposed) to these waveforms, and finally, the distorted waveforms are fed to the detailed model of PMUs simulated in EMT domain. Outputs of both simulators can be found in the submitted file.
- Categories:
712 Views
This dataset provides the data applied in the case studies of the manuscript "Backcasting the Techno-economic Targets For Constructing Low-carbon Power Systems". Both the modified Garver’s 6-bus and realistic Northwest China power system are presented here, in two excel files respectively. The datasets include detailed information about buses, units, existing corridors, and candidate corridors. Average cost variations and load growth rate over the planning period are also provided.
- Categories:
364 Views
Impedance-based models of wind generators are widely used to analyze unstable oscillations between the grid and the control system of wind park generators. However, it is unclear what are the key control parameters that must be considered in the models at different frequency ranges (subsynchronous, near synchronous and high frequencies). The models can be either highly detailed, at the expense of complex algebraic derivations, or oversimplified, but unable to reliably predict control-to-grid instabilities.
- Categories:
259 Views
These PLECS simulation files are for the article: Modeling and Advanced Control of Dual Active Bridge DC-DC Converters: A Review. The simulation files of the following DAB control methods are included: feedback-only control, linearization control, feedforward plus feedback, disturbance-observer-based control, feedforward current control, model predictive current control and moving discretized control set model predictive. Besides, a simulation file comparing the DAB circuit and the reduced order model is also provided.
- Categories:
3295 Views
This dataset was used to produce the results of following paper:
Title: Risk-constrained Optimal Dynamic Trading Strategies Under Short- and Long-term Uncertainties
- Categories:
374 Views
This dataset is used to assess the energy consumption of the collaborative robot UR3e. The dataset consists of six experiments. Different operational conditions are modified in each experiment to determine their influence. The datasets have the following information: recording time, trajectory ID, joints' positions, joints' velocities, motor currents, motor torques, motor voltages, motor temperatures, current, and voltage of the robot. This dataset is used as a study case of a new methodology for energy assessment.
- Categories:
257 Views
Convergence analysis of the Decomposition-Iteration algorithm.
- Categories:
145 Views
This file contains one-year measurements of demand (average 11 kWh/day), Electric vehicle charging (3 kW rating), and PV generation (3.3 kWp) for a household in London, UK.
This dataset is associated with the following paper:
A. A. R. Mohamed, R. J. Best, X. A. Liu and D. J. Morrow, "A Comprehensive Robust Techno-Economic Analysis and Sizing Tool for the Small-Scale PV and BESS," in IEEE Transactions on Energy Conversion, doi: 10.1109/TEC.2021.3107103.
- Categories:
3603 Views
Gueter und Dienstleistungen ab 2020
- Categories:
260 Views
This dataset is in support of my 2 research papers ' '.
Preprint :
- Part I :
- Part II :
Related Claim : Novel ß Non-Linear Theory, Novel ß Solar Boost Converter and Novel ß Power Boost DC-DC Converter in Patent 'Novel ß 10-Axis Grid Compatible Multi-Controller'
- Categories:
1644 Views