Electric Utility
This provides the code and data used in the paper "Optimal EV Scheduling in Residential Distribution Networks Considering Customer Charging Preferences" by Mailys Le Cam and Barry Hayes.
Some material has been adapated from the OpenDSS help files: http://smartgrid.epri.com/SimulationTool.aspx Some data has been taken from the IEEE test feeders archive: http://sites.ieee.org/pes-testfeeders/
- Categories:
850 Views
The power flow is usually formulated by nonlinear equations and may present multiple solutions. However, most of these solutions do not represent a practical situation but are mathematical findings. Remarkably, in unbalanced multiphase systems with impedance-grounded loads, a phenomenon can occur where two or more solutions may especially show practical significance. These solutions are called operationally-stable solutions (solutions which for a given loading level the nodal voltages, currents, and losses are feasible) and may be obtained in Distribution Systems (DS).
- Categories:
241 Views
These data are complementary to the paper: " New Proposed Overcurrent Relay Coordination
for Microgrid Protection"
- Categories:
690 Views
The uploaded data file is a part of data used or generated by a real time security system for frequency control in electrical grids with variable renewable generation proposed in a paper entitled: “Dynamic regulation in electrical networks with non-controlled sources”. The proposed security system analyzes the electrical network in both steady-state and dynamic state. The test systems IEEE 39-bus were used adding wind generation models to evaluate the proposed security system.
- Categories:
691 Views
The solenoid coil is designed to provide an inductance range of 200 to 300 microns to adjust the impedance. To simulate and calculate the inductance of the coil, two analytical methods and the finite element method have been used, which are the most common methods for calculating the inductance.
- Categories:
138 Views
This is a MatLab simulink model of Doubly armature technique for improved efficiency of induction motor. The same manuscript has been submitted in the IEEE transactions on Energy Conversion.
- Categories:
198 Views
The paper introduces an analytical approach to predict the no-load flux density spatial repartition of inner permanent magnet tubular-linear synchronous machines (IPM T-LSMs). It considers a trapezoidal waveform whose maximum value is predicted using a simple magnetic equivalent circuit of an elementary part of the machine. Then, the accuracy of the proposed approach is enhanced by the incorporation of a mover permeance function that accounts for the PM luxconcentrating arrangement.
- Categories:
156 Views
The purpose of distribution network reconfiguration (DNR) is to determine the optimal topology of an electricity distribution network, which is an efficient measure to reduce network power losses. Electricity load demand and photovoltaic (PV) output are uncertain and vary with time of day, and will affect the optimal network topology. Single-hour deterministic DNR is incapable of handling this uncertainty and variability. Therefore, this paper proposes to solve a multi-hour stochastic DNR (SDNR).
- Categories:
1957 Views
The dataset contains internal faults in power transformer and phase angle regulators (PAR) in a 5-bus interconnected system. It also has 6 other power system transients which include magnetising inrush, sympathetic inrush, external faults with CT saturation, capacitor switching, non-linear load switching, and ferroresonance. There are 88128 internal fault files and 12780 files of other transient disturbances. The faults and transients are simulated in PSCAD/EMTDC and the output files are in text format.
- Categories:
3685 Views
The dataset contains 500 sets of steady state PMU data from both ends of a 500kV, 300km transmission line.
- Categories:
483 Views