Communications
Recently, unmanned aerial vehicles (UAVs) have been receiving significant attention due to the wide range of potential application areas. To support UAV use cases with beyond visual line of sight (BVLOS) and autonomous flights, cellular networks can provide connectivity points to UAVs and provide remote control and payload communications. However, there are limited datasets to study the coverage of cellular technologies for UAV flights at different altitudes.
- Categories:
806 Views
A synthetic laser reliability dataset generated using generative adversarial networks (GANs) is provided. The data includes normalized current measurements estimated at the following times: 2, 20, 40, 60, 80, 100, 150, 500, 1000, and 1500 hours. The data can be used to train machine learning models to solve different predictive maintenance tasks such as prediction of performance degradation, remainng useful prediction, and so on.
- Categories:
117 Views
A monitoring data, which includes several OTDR traces incorporating various types of fiber events (e.g. reflective, non-reflective, merged events) induced along an optical fiber link, is provided. Different fiber faults such as fiber cut, and fiber bend are modeled using optical components such as connectors and variable optical attenuators (VOAs). The data can be used to train machine learning models for solving fiber fault diagnosis problems.
- Categories:
1015 Views
This data is the Federal Communication Commission (FCC) F(50,50) signal strength variation curves for the Very High Frequency (VHF) Channel 7-13 and the Ultra High Frequency (UHF) Channel 14-69. The signal strength for both curves is in dBuV/m for an Effective Radiated Power (ERP) per dipole of 1 kW. All data are based on a 9 m mobile antenna height measurement for 30 m to 600 m antenna heights within a transmitter-receiver separation ranging from 1.5 km to 100 km.
- Categories:
186 Views
The monitored data is obtained using the optical time domain reflectometry (OTDR) principle, which is commonly used for troubleshooting fiber optic cables or links. The data set contains raw OTDR traces that include one or two reflective events caused by the placement of one or two reflectors and/or an open physical contact (PC) at the end of the monitored optical fiber link.
- Categories:
1757 Views
Evolving from the well-known ray-tracing dataset DeepMIMO, the DeepVerse 6G dataset additionally provides multi-modal sensing data generated from various emulators. These emulators provide the wireless, radar, LiDAR, vision and position data. With a parametric generator, the DeepVerse dataset can be customized by the user for various communication and sensing applications.
- Categories:
109 Views
Beam management is a challenging task for millimeter wave (mmWave) and sub-terahertz communication systems, especially in scenarios with highly-mobile users. Leveraging external sensing modalities such as vision, LiDAR, radar, position, or a combination of them, to address this beam management challenge has recently attracted increasing interest from both academia and industry. This is mainly motivated by the dependency of the beam direction decision on the user location and the geometry of the surrounding environment---information that can be acquired from the sensory data.
- Categories:
981 Views
This dataset provides wireless measurements from two industrial testbeds: iV2V (industrial Vehicle-to-Vehicle) and iV2I+ (industrial Vehicular-to-Infrastructure plus sensor).
iV2V covers 10h of sidelink communication scenarios between 3 Automated Guided Vehicles (AGVs), while iV2I+ was conducted for around 16h at an industrial site where an autonomous cleaning robot is connected to a private cellular network.
- Categories:
2257 Views
The complete description of the dataset can be found at: https://arxiv.org/abs/2305.03170
- Categories:
8110 Views
Future mobile communication systems include millimeter wave (mmWave) frequency bands and high mobility scenarios. To learn how wave propagation and scattering effects change from classical sub 6 GHz to mmWave frequencies, measurements in both bands have to be conducted. We perform wireless channel measurements at 2.55 GHz and 25.5 GHz center frequency at velocites of 40 km/h and 100 km/h. To ensure a fair comparison between these two frequency bands, we perform repeatable measurements in a controlled environment.
- Categories:
679 Views