Power and Energy
This data-set consists of 3-phase differential currents of internal faults and 4 other transients cases for Phase Angle Regulators (PAR). The transients other than faults include magnetizing inrush, sympathetic inrush, external faults with CT saturation, and overexcitation conditions.
PSCAD/EMTDC software is used for simulation of the internal faults and the transients.
- Categories:
633 Views
Multiwinding-Transfomer-based (MTB) DC-DC converter did emerge in the last 25 years as an interesting possibility to connect several energy systems and/or to offer higher power density because of the reduction of transformer core material and reduction of power converter stages. MTB DC-DC converters can be considered as an interesting compromise between non-modular and a modular DC-DC converter since they are themselves modular in the construction.
- Categories:
1156 Views
High-voltage batteries in battery electric vehicles face significant load fluctuations due to driving behavior. This dynamic performance of the powertrain is contrasted by the almost constant load of the auxiliary consumers. The highest auxiliary consumption is generated by the heating and air conditioning system, which decreases the vehicles range significantly. 72 real driving trips with a BMW i3 (60 Ah) were recorded, serving for model validation of a full vehicle model consisting of the powertrain and the heating circuit.
- Categories:
16747 Views
Distribution 20kV Surge Arrester Historical Inspection Data from year 2007 to 2019 and from an European utility company
- Categories:
389 Views
20kV PILC Cable Historical Inspection Data from year 2007 to 2019 from an European utility company
- Categories:
337 Views
20kV XLPE Cable Historical Inspection Data from year 2010 to 2019 from an European utility company
- Categories:
570 Views
Asset health index evalualtion results from an European utility company
- Categories:
494 Views
This dataset contains python / jupyter notebooks with thermal magnitude data and loss simulations from IGBT-based converters. It also has implemented the proposed model and the results of the validations that compare the model with the simulations of three IGBT manufacturers.
- Categories:
230 Views
DataSet used in learning process of the traditional technique's operation, considering different devices and scenarios, the proposed approach can adapt its response to the device in use, identifying the MAC layer protocol, perform the commutation through the protocol in use, and make the device to operate with the best possible configuration.
- Categories:
575 Views
This Excel file presents the built database for the paper titled "Bridgeless PFC topology simplification and design for performance benchmarking".
1. You can find more details about how to use the data presented here to build the component model in the paper.
2. In the "calculated results sheet", you can see our case study results by using this built database to select components and benchmark the bridgeless buck-boost PFC converters.
- Categories:
274 Views