Power and Energy
This data set consists of 3-phase currents of faults and other transient cases for transmission lines connected with PV Farms. PSCAD/EMTDC software is used for the simulation of faults and other transients. Transmission lines connected to photovoltaic (PV) farm protection is crucial for ensuring reliable and safe operation. PV farms generate electricity from sunlight and feed it into the grid via transmission lines. However, factors such as fluctuations in solar irradiance, system faults, and grid instability can lead to voltage and current imbalances.
- Categories:
579 Views
This paper presents a vehicle side wireless synchronization controller suitable for high-power inductive power transfer (IPT) systems for electric vehicle (EV) wireless charging under stationary and semi-dynamic conditions. The objective of this work is to enable improved functionality, efficiency, and power density of high-power IPT systems under misaligned conditions. An existing 50 kW LCL-LCL tuned IPT system with dual active bridges (DAB) demonstrates the controller’s performance.
- Categories:
209 Views
A 500kV single-phase two-core column nuclear power main transformer is simulated and tested.Firstly, based on the principle of fluid-thermal coupling simulation, the three-dimensional simulation calculation of single-phase two-core column nuclear power main transformer is carried out, and the3D temperature field distribution is obtained, and the accuracy of the 3D simulation model is verified by experiments.
- Categories:
120 Views
Experimental measurement data was obtained utilizing RCbenchmark 1780 with full-range PWM signals. Measurements were made for two series of setups.
First series is related to low-voltage setups using the following T-MOTOR components: - motors: MN4014 400Kv, MN5212 340Kv, MN501-S 360Kv, U7 280Kv, MN6007 320Kv, P60 340Kv, MN701-S 280Kv; - ESC: Air 40A, Flame 40A, Flame 70A, Alpha 60A, Flame 100A; - propellers: P17×5.8, P18×6.1, P20×6, P22×6.6, P24×7.2, G26×8.5; - battery: 6-cell (6S) Lithium polymer (LiPo).
- Categories:
149 Views
This dataset presents the simulation and PCB design files associated with a Switching Cell with Pulse Frequency Modulation (SC-SFM) for DC-DC conversion. The aim of sharing these files on a data-sharing platform is to provide researchers and practitioners with resources for further exploration and development in dthe field of power electronics.
- Categories:
131 Views
This dataset introduces the simulation and PCB design files accompanying an article on the Interleaved Boost Converter with Pulse Frequency Modulation (IBC-PFM) for Power Factor Correction (PFC). The purpose of sharing these files on the IEEE Dataport platform is to facilitate further research and development in the field of power converters.
- Categories:
216 Views
This dataset presents a comprehensive collection of measurements obtained from a self-made test bed called the NET Playground, focusing on the performance evaluation of an IPFS (InterPlanetary File System) consumer and multiple providers. The dataset comprises 45 sets of data, each representing a scenario involving the consumer requesting a 10MB file from a varying number of available providers ranging from 1 to 15. The network configuration involves all nodes (consumer and providers) being connected in a peer-to-peer network and utilizing IPFS as the communication protocol.
- Categories:
84 Views
This data set gives information on the TGA and FTIR analysis of neat nano mica fillers, before and after surface salination with HMDS. This is used to gain information regarding the successful surface hydrophobic salination of nano mica platelets. The reduction in hydroxyl group density as visualized in FTIR gives insight on the stripping of polar hydrophilic hydroxyl groups. Similarly, the use of TGA analysis helps in further ascertaining the successful surface salination treatments. This can be obtained by observing the change in residual mass.
- Categories:
15 Views
The dataset includes active power measurements for a residential student building located in Bucharest, Romania, collected at 1 frame/second (or 0.5 frames/s) reporting rate over 12 consecutive months.
Always-on appliances include the refrigerator and the wireless router. Several other appliances are installed in the residential unit: washing machine, lighting fixtures, electrical iron, vacuum cleaner, various ICT charging devices, and air conditioning (seldom used).
- Categories:
478 Views
The dataset includes active power measurements for a residential student building located in Bucharest, Romania, collected at 1 frame/ 2 second reporting rate over 12 consecutive months.
Always-on appliances include the refrigerator and the wireless router. Several other appliances are installed in the residential unit: washing machine, lighting fixtures, electrical iron, vacuum cleaner, various ICT charging devices, and air conditioning (seldom used).
- Categories:
1305 Views