Wireless Networking
Radio Signal Strength data from a mobile robot along with odometer in indoor and outdoor environments
This dataset contains the RSS (Radio Signal Strength) data collected with a mobile robot in two environments: indoor (KTH) and outdoor (Dortmund). RSSI metric was used to collect the RSS data in terms of dBm. The mobile robot location was recorded using its odometry (dead reckoning).
release date: 2016-01-05
- Categories:
Accelerometer samples collected through Android phones when driven on different vehicles.
This dataset consists of accelerometer samples collected through Android phones when driven on different vehicles. The dataset consists of 678 Km of drive data, which involved 22 different drivers, 5 different types of vehicles (bus, auto rickshaw, cycle rickshaw, motorcycle, and car) and 4 smartphones.
date/time of measurement start: 2012-03-12
date/time of measurement end: 2013-03-23
- Categories:
Dataset of RF device usage measurements collected using a signal analyzer for use by Airshark.
This is a dataset of RF device usage measurements collected at University of Wisconsin-Madison for demonstration of functionality of Airshark.
date/time of measurement start: 2011-04-15
date/time of measurement end: 2011-05-06
- Categories:
Dataset of routing and topology traces collected during MANIAC Challenge.
The dataset comprises routing and topology traces collected during the Mobile Ad hoc Networks Interoperability And Cooperation (MANIAC) Challenges, held on November 25-26th 2007 in conjunction with IEEE Globecom 2007 and on March 8, 2009 in conjunction with IEEE PerCom 2009.
date/time of measurement start: 2007-11-25
date/time of measurement end: 2007-11-26
- Categories:
This dataset provides Channel Impulse Response (CIR) measurements from standard-compliant IEEE 802.11ay packets to validate Integrated Sensing and Communication (ISAC) methods. The CIR sequences contain reflections of the transmitted packets on people moving in an indoor environment. They are collected with a 60 GHz software-defined radio experimentation platform based on the IEEE 802.11ay Wi-Fi standard, which is not affected by frequency offsets by operating in full-duplex mode.
The dataset is divided into two parts:
- Categories:
Location-aware dataset collected using Place Lab software.
These traces contain 802.11, GSM and GPS trace data collected using Place Lab software, for 3 different neighborhoods in the Seattle metro area. Total trace duration is approximately 2 hours, with around 55,000 total readings.
date/time of measurement start: 2004-09-26
date/time of measurement end: 2004-09-29
- Categories:
Connectivity and throughput measurement from home wireless networks.
Measurements reflect connectivity and UDP/TCP throughput data collected from a grid of six nodes placed within three different houses.
date/time of measurement start: 2005-06-29
date/time of measurement end: 2005-07-03
- Categories:
This dataset is a collection of phase samples retrieved from an in-house design for a Bluetooth Low Energy (BLE) 5.1 based receiver, using an 8-element Uniform Circular Array (UCA). The purpose of the dataset was the implementation of localization techniques based on the use of Angle-of-Arrival data, possible due to the BLE 5.1 Direction Finding (DF) features. Specifically, the phase differences of a Constant Tone Extension (CTE) read from the different antenna elements can be used to retrieve the AoA of a received packet.
- Categories:
Time- and frequency-variant 2.4 GHz ISM band channel gain.
The time- and frequency-variant channel gain is measured in the presence of an industrial cyclic moving robot arm obstacle for four coexisting wireless nodes for the whole license-free 2.4-GHz-ISM band with a time- and frequency-resolution of 110 microseconds and 1 MHz, respectively. Results for two links are given.
date/time of measurement start: 2015-05-11
date/time of measurement end: 2015-05-11
- Categories: