Datasets
Standard Dataset
RIS-Power-Measurements-Dataset
- Citation Author(s):
-
MarcoRossanese
NEC Laboratories Europe GmbHPlacidoMursiaNEC Laboratories Europe GmbHAndresGarcia-SaavedraNEC Laboratories Europe GmbHVincenzoSciancaleporeNEC Laboratories Europe GmbHArashAsadiTechnische Universitat DarmstadtXavierCosta-PérezNEC Laboratories Europe GmbH, i2CAT Foundation, ICREA - Submitted by:
- Placido Mursia
- Last updated:
- Thu, 10/27/2022 - 03:57
- DOI:
- 10.21227/tj39-zr48
- Data Format:
- Research Article Link:
- Links:
- License:
402 Views- Categories:
- Keywords:
0 ratings - Please login to submit your rating.
Abstract
Here we provide the dataset containing the power measurements obtained with our RIS prototype, which were carried out in the anechoic chamber of TU Darmstadt.
The use of data here contained is intended only for research purposes.
Instructions:
The test was performed under the following conditions:
- TX at 1.1m away from RIS with 33° elevation angle and θt = [20°,90°]
- RX at 6.3m away from RIS with -3° elevation angle and θt = [90°]
- Horn antennas gain = 13.5 dBi
- OFDM QPSK-modulated symbols with 5 MHz of bandwidth, numerology that meets LTE requirements.
- TX power per subcarrier = -30 dBm
- Reference signal received power (RSRP) sampling at RX
- Noise floor = -90dBm
For more details, please refer to sec. 5 of our paper https://arxiv.org/abs/2207.07121.
In the CSV file, the pair (θn, Φn) defines the RIS main beam location: θn for the azimuth and Φn for the elevation. Instead, θr indicates the angle for the radiation pattern varying with a step of 3° on the azimuth.
Funding Agency:
EU FP for Research and Innovation Horizon 2020
Grant Number:
861222, 101017109, 101017011
Documentation
