Nanovoltampermeter-based bioacoustic carrier wave analyzer

NON-STANDARD EQUIPMENT FOR NEW BIOACUSTIC METROLOGYAdamovich E.D. 1

1. INEPCP RAS

  |   Fulltext File (424 K)  

Abstract:

The bioacoustic signal is characterized by a set of characteristics - descriptors, only a complete set of which ensures the completeness of its measurement and automatic identification. Meanwhile, modern measurement technologies, metrological approaches and methods common in bioacoustics characterize only a small part of the data and do not use full samples of analog information of the corresponding register registers. In this connection, there is a need to create a new measurement paradigm and metrology of bioacoustic research, in which these descriptors are archival for system identification. In developing this area, we based on the work previously performed by members of our group in other areas, but formed in some positions the basis for a new approach. The subject of this article is the introduction into the problematics of modern bioacoustic "descriptor" instrument-making. DOI: 10.6084/m9.figshare.4879859

Keywords: Bioacoustic signal, descriptor, metrology