vital signs data using FMCW radar
- Citation Author(s):
-
Haochen Li
- Submitted by:
- Haochen Li
- Last updated:
- DOI:
- 10.21227/44tb-0m97
- Data Format:
592 views
- Categories:
- Keywords:
Abstract
A set of non-stationary target vital sign signals measured by the FMCW radar, with data from a total of four testers, were tested for five sets of one minute each, with the testers approximately 1m away from the radar, in a non-stationary state. The radar-measured vital sign signals are stored in a .bin format file, the radar parameters are set in a Logfile.txt file, and the remaining two .txt files are the reference data collected with the respiratory and heartbeat sensors.
Instructions:
The radar data is processed according to the radar configuration parameter information, and within the reference sensor data is the reference respiratory heartbeat signal, which is used to validate the correctness of one's proposed radar processing algorithm
the data in the above dataset refers to the raw ADC data format of the FMCW radar ?
.