Self-potential and GNSS data recorded on a post-failure landslide
- Citation Author(s):
-
Kaiyan Hu
- Submitted by:
- Kaiyan Hu
- Last updated:
- DOI:
- 10.21227/9vrc-na76
231 views
- Categories:
Abstract
Targeting the Huangnibazi Landslide located in the southwestern mountainous region of China, which is mainly induced by the heavy rainfall and the Jiuzhaigou earthquake, we implement the self-potential (SP) monitoring system and global navigation satellite system (GNSS) on the slope. The SP and GNSS data monitored at the slow-moving stage of the landslide are supplied.
Instructions:
Self-potential and GNSS data are included here.
SP data file ('Filetered_SP_5min.txt') contains that 1st column represents the MATLAB time; the 2nd-36th column represents the SP data (in mV) recorded at the measured electrode A1- A32 and A34 - A36 (the A33 is not available); the 19th (B5), the 37th-48th column represents the SP data (in mV) recorded at the measured electrode B1- B13.
GNSS data file ('GPS01.txt') contains that the time, x-component, y-component, z-component, and the resultant total displacement in mm.
