peyman mahouti

Transistor models are crucial for circuit simulation. Reliable design of high-performance circuits requires that transistor characteristics are adequately represented, which makes accurate and fast models indispensable. Scattering (or S-)parameters are perhaps the most widely used RF characteristics, employed in the design and analysis of linear devices and circuits for calculation of the input and output impedance, isolation, gain, as well as stability, all being important performance figures for small-signal or low-noise amplifiers.

Characteristic impedance Result of Microstrip Transmission lines with 3D EM simulation tool

These data had been donated by Peyman Mahouti in 2019.

Donators note:

Please cite the following paper if you use this data set:

[1]      Mahouti P, Gunes F, Belen MA, Demirel S. Symbolic Regression for Derivation of an Accurate Analytical Formulation Using Big Data : An Application Example. ACES JOURNAL 2017; 32(5): 574-591.

In this data set:

A microstrip reflectarray antenna is a hybrid design of a reflector antenna and a planar phased array antenna where a feed element illuminates reflecting surface, which can be either flat, slightly curved or a non-uniform plane in order to convert a spherical wave produced by its feed into a plane wave. On the reflecting side of the surface, there might be a series of the printed patch, dipole, loop elements or just a dielectric layer without any power division network.