Universal Model of a Multiphase Permanent Magnet Synchronous Motor
- Citation Author(s):
-
Evgeniy Stolyarov (Moscow Power Engineering Institute)Alecksey Anuchin (Moscow Power Engineering Institute)Yousef Ali (Moscow Power Engineering Institute)Maxim Lashkevich (Moscow Power Engineering Institute)Dmitry Aliamkin (Moscow Power Engineering Institute)Alexandr Zharkov (Moscow Power Engineering Institute)
- Submitted by:
- Evgeniy Stolyarov
- Last updated:
- DOI:
- 10.21227/brdv-b048
- Data Format:
449 views
- Categories:
- Keywords:
Abstract
Models of the electrical machines are used in the process of development control system and verification of them. Nowadays multiphase machines are attracting attention due to their reliability; however, standard MATLAB libraries are limited by 5-phase and 3-phase models. This paper considers a universal model of 3-, 5-, 6-, 7-, 9-phase permanent magnet synchronous motor. The model was developed using standard blocks of MATALB Simulink and can be used as a component of SimPowerSystem. Simulation results are provided as well as a link to the library for use free of charge.
Instructions:
This library requires Simulink MATLAB version R2020b and later.
To use this model, simply drag it from the library window to the workspace.
IMPORTANT!!!
Don't forget to place the powergui block from the SimScape library to your workspace. It is necessary for the model to work, since it is built on the basis of this library.
Thanks for the help