Program and Data

- Citation Author(s):
-
Peng Chang
- Submitted by:
- Peng Chang
- Last updated:
- DOI:
- 10.21227/dq85-4067
- Categories:
Abstract
The authors show parts of the data obtained from the simulation model and the used MATLAB program. The detailed steps are shown as follows:
Step 1: Import data into the MATLAB software.
Step 2: Run the program named ‘fft_algorithm’.
Step 3: Run the program named ‘Solve_XX’ based on the fault type of data.
Instructions:
The authors show parts of the data obtained from the simulation model and the used MATLAB program. The detailed steps are shown as follows:
Step 1: Import data into the MATLAB software.
Step 2: Run the program named ‘fft_algorithm’.
Step 3: Run the program named ‘Solve_XX’ based on the fault type of data.