Inductive Power Transfer System Using a Three-Phase to Single-Phase Midpoint Matrix Converter

Citation Author(s):: Ferdi
Kusumah

Aalto University
Submitted by:: Ferdi Kusumah
Last updated:: Tue, 05/17/2022 - 22:17
DOI:: 10.21227/s458-gc03
Data Format:: *.csv
Research Article Link:: From Signal to Image: Capturing Fine-Grained Human Poses With Commodity Wi-Fi
License:: Creative Commons Attribution

151 Views

Categories:: Standards Research Data
Keywords:: Power Electronics, matrix converter, Resonant power conversion, Inductive Power Transfer (IPT)

0 ratings - Please login to submit your rating.

ACCESS DATASET CITE

Abstract

These data were taken from three oscilloscopes (Tektronix TPS 2014B, 2024B and MDO4104C) connected to an inductive power transfer system utilizing the three-phase to single-phase midpoint matrix converter with a free-wheeling switch. They were taken under various transient and steady-state conditions. The 4 attached ZIP files contain 21 CSV files in total, with its own README.txt describing the data and oscilloscope channel configurations. Additionally, each ZIP file is supplied with a MATLAB m-file script to plot the data.

Instructions:

Extract the ZIP file and execute its MATLAB m-file to plot the waveforms. Alternatively, the CSV files can be plotted by other plotting software.