Datasets
Open Access
CRAWDAD cmu/zigbee-eda
- Citation Author(s):
- Submitted by:
- CRAWDAD Team
- Last updated:
- Fri, 10/22/2021 - 08:00
- DOI:
- 10.15783/t8mt-a674
- License:
- Categories:
- Keywords:
Abstract
Captured Zigbee packets during energy depletion attack experiments. DOI: 10.15783/t8mt-a674 (https://doi.org/10.15783/t8mt-a674)
This Carnegie Mellon University dataset contains Zigbee packets that were captured during energy-depletion attack experiments. More specifically, the contributors used Zigator to deploy two stand-alone WIDS sensors and capture Zigbee packets, while HiveGuard was used to archive the pcap files that were generated by the WIDS sensors. Each WIDS sensor corresponded to a Raspberry Pi 3 Model B+ that was equipped with an ATUSB in monitor mode. Four experiments were conducted to test four commercial Zigbee devices, each powered by a brand new CR2450 lithium battery, against an energy depletion attack that was launched by an ATUSB with modified firmware. This research was supported in part by the CyLab Security and Privacy Institute. More details about the setup of each experiment, as well as the keys that were used to encrypt and authenticate the captured Zigbee packets, can be found in the dataset.
institution :
Carnegie Mellon University (CMU)
version :
2021-10-22
Traceset
spring2021
- files: sth3-z2motion.zip, sth3-z2multi.zip, sth3-z3button.zip, sth3-z3multi.zip
- description: Set of Zigbee packets that were captured during the Spring 2021 semester.
- tech description: Captured Zigbee packets during four experiments that tested an energy depletion attack against four commercial Zigbee devices, where each of them was powered by a brand new CR2450 lithium battery. The Zigbee packets were captured by two WIDS sensors and archived by HiveGuard, while the energy depletion attack was launched by an ATUSB with modified firmware. This research was supported in part by the CyLab Security and Privacy Institute.
- collection method: see individual traces below.
- dataname: spring2021
- version: 2021-10-22
- date/time of measurement start: 2021-04-29
- date/time of measurement end: 2021-05-02
spring2021 Traces
- sth3-z2motion.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a legacy Zigbee motion sensor were used.
- description: The sth3-z2motion.zip file contains two folders, named rpi01 and rpi02, and the sth3-z2motion.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z2motion experiment, while the sth3-z2motion.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.
- last modified: 2021-10-22
- dataname: sth3-z2motion.zip
- url: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z2motion.zip
- sth3-z2multi.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a legacy Zigbee multipurpose sensor were used.
- description: The sth3-z2multi.zip file contains two folders, named rpi01 and rpi02, and the sth3-z2multi.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z2multi experiment, while the sth3-z2multi.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.
- last modified: 2021-10-22
- dataname: sth3-z2multi.zip
- url: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z2multi.zip
- sth3-z3button.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a Zigbee 3.0 button were used.
- description: The sth3-z3button.zip file contains two folders, named rpi01 and rpi02, and the sth3-z3button.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z3button experiment, while the sth3-z3button.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.
- last modified: 2021-10-22
- dataname: sth3-z3button.zip
- url: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z3button.zip
- sth3-z3multi.zip: Set of Zigbee packets that were captured by two WIDS sensors and archived by HiveGuard during the experiment where a SmartThings Hub (IM6001-V3P01) and a Zigbee 3.0 multipurpose sensor were used.
- description: The sth3-z3multi.zip file contains two folders, named rpi01 and rpi02, and the sth3-z3multi.txt file. Each folder contains the pcap files that HiveGuard archived from the corresponding WIDS sensor during the sth3-z3multi experiment, while the sth3-z3multi.txt file contains additional information about the experimental setup and the keys that were used to encrypt and authenticate the captured Zigbee packets.
- last modified: 2021-10-22
- dataname: sth3-z3multi.zip
- url: /download/cmu/zigbee-eda/2021-10-22/spring2021/sth3-z3multi.zip
The files in this directory are a CRAWDAD dataset hosted by IEEE DataPort.
About CRAWDAD: the Community Resource for Archiving Wireless Data At Dartmouth is a data resource for the research community interested in wireless networks and mobile computing.
CRAWDAD was founded at Dartmouth College in 2004, led by Tristan Henderson, David Kotz, and Chris McDonald. CRAWDAD datasets are hosted by IEEE DataPort as of November 2022.
Note: Please use the Data in an ethical and responsible way with the aim of doing no harm to any person or entity for the benefit of society at large. Please respect the privacy of any human subjects whose wireless-network activity is captured by the Data and comply with all applicable laws, including without limitation such applicable laws pertaining to the protection of personal information, security of data, and data breaches. Please do not apply, adapt or develop algorithms for the extraction of the true identity of users and other information of a personal nature, which might constitute personally identifiable information or protected health information under any such applicable laws. Do not publish or otherwise disclose to any other person or entity any information that constitutes personally identifiable information or protected health information under any such applicable laws derived from the Data through manual or automated techniques.
Please acknowledge the source of the Data in any publications or presentations reporting use of this Data.
Citation:
Dimitrios‑Georgios Akestoridis, Patrick Tague, CRAWDAD dataset cmu/zigbee‑eda (v. 2021‑10‑22), downloaded from https://crawdad.org/cmu/zigbee‑eda/2021‑10‑22, https://doi.org/10.15783/t8mt-a674, Oct 2021.
Dataset Files
- sth3-z2motion.zip (7.04 MB)
- sth3-z2multi.zip (5.77 MB)
- sth3-z3button.zip (4.17 MB)
- sth3-z3multi.zip (10.74 MB)
Open Access dataset files are accessible to all logged in users. Don't have a login? Create a free IEEE account. IEEE Membership is not required.
These datasets are part of Community Resource for Archiving Wireless Data (CRAWDAD). CRAWDAD began in 2004 at Dartmouth College as a place to share wireless network data with the research community. Its purpose was to enable access to data from real networks and real mobile users at a time when collecting such data was challenging and expensive. The archive has continued to grow since its inception, and starting in summer 2022 is being housed on IEEE DataPort.
Questions about CRAWDAD? See our CRAWDAD FAQ. Interested in submitting your dataset to the CRAWDAD collection? Get started, by submitting an Open Access Dataset.