Datasets
Standard Dataset
The Wired Ethernet Card output Signals
- Citation Author(s):
-
YuanyuanHu
- Submitted by:
- Yuanyuan Hu
- Last updated:
- Thu, 01/02/2025 - 00:37
- DOI:
- 10.21227/a371-f626
- Data Format:
- License:
23 Views- Categories:
- Keywords:
Abstract
This dataset contains signals collected on 7 different dates from 13 wired Ethernet network cards transmitted using the 100BASE-TX protocol. The signal is collected at the access point (switch side) using an oscilloscope with a sampling rate of 625Mbps and a sampling accuracy of 8 bits. The acquired signal has a full Ethernet frame. When collecting data, the same network cable is used to ensure the consistency of channel features and facilitate the study of network card features. This data set can be used for identification and authentication of wired Ethernet network cards, such as fingerprint extraction or PUF extraction, and corresponding classification recognition.
This dataset contains signals collected on 7 different dates from 25 wired Ethernet network cards transmitted using the 100BASE-TX protocol. The signal is collected at the access point (switch side) using an oscilloscope with a sampling rate of 625Mbps and a sampling accuracy of 8 bits. The acquired signal has a full Ethernet frame. When collecting data, the same network cable is used to ensure the consistency of channel features and facilitate the study of network card features. This data set can be used for identification and authentication of wired Ethernet network cards, such as fingerprint extraction or PUF extraction, and corresponding classification recognition.
